It's been way too long...

Update with pictures!

Finally an update with some photos! Sorry it's been a long time between posts.

Propane: I ran new 3/8 copper under the trailer and into the wheel well area and put in a shutoff valve. I found the valve at home depot in the water heater area. I had use a mip to flare fitting to make both ends 3/8 flare.

From Darcy and Paul's Shasta

Next, I ran a six foot propane hose from the valve, through the wall, and to the wave 3 heater. I used a PC desk hole finish fitting to make the hole look nice. I think the bent hose to the heater looks pretty good…

From Darcy and Paul's Shasta

My bro in law and I have been working on building wings. Here’s some pics of our progress. I think they are going to turn out pretty nice:

From Darcy and Paul's Shasta

From Darcy and Paul's Shasta

From Darcy and Paul's Shasta

From Darcy and Paul's Shasta

From Darcy and Paul's Shasta

From Darcy and Paul's Shasta

From Darcy and Paul's Shasta

From Darcy and Paul's Shasta

From Darcy and Paul's Shasta

From Darcy and Paul's Shasta

I disassembled the stove/oven and rebuilt it with new insulation. I had the front facing parts powder coated white and it turned out really nice.

From Darcy and Paul's Shasta

Fantastic fan is in and working great

From Darcy and Paul's Shasta

I cut an air access hole for the converter and finished it off with a decorative floor heater cover from lowes:

From Darcy and Paul's Shasta

From Darcy and Paul's Shasta

I got the water tank installed and plumbed from the gravity fill and to the sink:

From Darcy and Paul's Shasta

From Darcy and Paul's Shasta

Here's a pic of one of the dinette seats installed to see what it looks like:

From Darcy and Paul's Shasta

Here is the fabric we'll be using for the curtains:



Here is the fabric our futon cover will be in: